Results 1 to 5 of 5

Thread: DIY Weights

  1. #1
    Join Date
    Jan 2009
    Location
    Utah
    Posts
    3,859

    Default DIY Weights

    I thought I'd try this simple stick weight build. Having some old lead around, these weights are only about $10/each out of pocket.

    First time melting lead:


    1 1/4" EMT conduit with 1" knockout caps. 14" pipe = 9.2 pounds:






    2006 Dodge Ram 3500 Dually, 21' North River Seahawk

  2. #2
    Join Date
    Oct 2009
    Location
    Western North Carolina
    Posts
    445

    Default

    Very Nice!!!!! SuperD Slick build, does the eye bolt extend down into the lead inside?

  3. #3
    Join Date
    Jan 2009
    Location
    Utah
    Posts
    3,859

    Default

    The eye has a 2.5" shank. I double nutted a washer at the tip of the shank to act as an anchor in the lead. It's not coming out. I also JB Welded the caps on both ends so it should be water tight.
    2006 Dodge Ram 3500 Dually, 21' North River Seahawk

  4. #4

    Default

    Dave did you leave the 1" 1/4 emt on or take it off? I am trying to get ready to make me some while my boat is getting repaired. Thanks Bill

  5. #5
    Join Date
    Jan 2009
    Location
    Utah
    Posts
    3,859

    Default

    Bill, the caps in the 2nd and 3rd pics seal the lead in the conduit. 14” of 1 1/4” EMT created 9 lbs. weights.
    2006 Dodge Ram 3500 Dually, 21' North River Seahawk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •