Results 1 to 5 of 5

Thread: Arrow Flash Dodgers

  1. #1
    Join Date
    Sep 2013
    Location
    Salt Lake
    Posts
    255

    Default Arrow Flash Dodgers

    Does any one know where to buy
    a blank to make, Arrow Flash Dodgers
    4.25" long by 3" wide
    does Hagens sale them? if so what is the part number.

  2. #2
    Join Date
    Sep 2010
    Location
    Graham, WA
    Posts
    377

    Default Poulsen Cascade Tackle

    I think Poulsen Cascade Tackle makes them.

  3. #3

    Default

    Hagen's sells a very large inner blade in stainless that is similar but not exactly the same. I have bought some and used them they have assimilated action at Kokanee trolling speeds. They are a bit wider for their length, about 4" x2.5". You will have to drill a hole at the bottom for a split ring and swivel.I have made a few Dodgers with them and they do work. Good luck.
    K

  4. #4
    Join Date
    Sep 2013
    Location
    Salt Lake
    Posts
    255

    Default

    Quote Originally Posted by kelson View Post
    Hagen's sells a very large inner blade in stainless that is similar but not exactly the same. I have bought some and used them they have assimilated action at Kokanee trolling speeds. They are a bit wider for their length, about 4" x2.5". You will have to drill a hole at the bottom for a split ring and swivel.I have made a few Dodgers with them and they do work. Good luck.
    K
    I see some on page 71 but they don't look that big.

  5. #5

    Default

    Yes they are the ones on pg. 71. Here is a pic of one i made next to one of the large arrow flash dodgers. The actual dimensions are 4" by 2.20". Hope this helps.

    Click image for larger version. 

Name:	image.jpeg 
Views:	168 
Size:	78.3 KB 
ID:	9002

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •