Shasta's shuttle hawk vs. seps simply trollin

[sawtooth]

I have read quite a bit about the shuttle hawk in past threads, but nothing about the seps simply trollin. Has anyone had an opportunity to compare the two designs? I was looking to give one or both a try this spring and thought I would check with this forum to see if there was a consensus on which was best. Thanks for your input.

Sawtooth

[HiTechKoke]

Most definitely and I prefer the Shasta Shuttle Hawks as they are much less prone to getting stuck on the way down due to their design. The only minor downside on the Shuttle Hawks can fall off easier if the cable jiggles enough to take them outside of their slot. I never bring them above water if I can help it when I remove them so I grab them at the water level to take them off.

I also use some of the dum-dum putty around the slot where the cable goes in as a protection so the cable does not jiggle out which only really an issue on bringing them up. Shasta Tackle also changed the design in the last year or so so they are longer which makes them easier to get down to depth. The key to both of them is having line tension on the way down which is what propels them down to your cable stop.

If you want to stack two lines on a downrigger then they are a definite plus and you have a 50/50 chance of not having to bring the cable up for the lower line and can change out that top line easier in the end. Expect a bit of learning curve but they work great and I have been using them for 7+ years.

Kevin

[SuperD]

Kevin, I've also heard someone say they use the smallest size binder clip at the slot with great success.

[Bduck]

I have a couple of Shuttle Hawks and like the way they work as well. As HTK says you don't have to bring the bottom line up. Haven't lost one yet but I guess its a matter of time.

[Full_Monte]

The Shuttle Hawks have been redesigned to reduce the tendency to fall off the wire. Some people also use rubber bands to eliminate the possibility of loss.

[sawtooth]

Sounds like the Shuttle Hawk is the forum favorite. I am also planning a trip to North Vancover Island at the end of July and was also wondering how the shuttle hawk does with the heavier gear used for chinnook. My main use would be for Kokes here in Idaho, but would like to run a stacker when up north this summer.

[Kokaholic]

I think it would work just fine

[Petty4life]

anyone got a pic of the seps simply trollin? id like to see what they look like

[sawtooth]

Here is a pic.

[Trophy Taker]

SAWTOOTH --- I went to Juneau Alaska three years ago to chase Silvers and Kings. I took two Shuttle Hawks since the boat I was fishing on only had manual downriggers. The Shuttle Hawks did not work very well in the Ocean but only because of all the Jellyfish and other ocean debris. This was by no means a reflection on the Shuttle Hawk, nobody's dive planer would have worked in those conditions. I had no idea so much crap was floating around in the ocean. If I didn't have Jellyfish hanging up on the downrigger cable it was reeds or other debris which ultimately prevented them from functioning as designed. Haven't had any problems with them in fresh water except for comming off the cable, which I rectified by using rubberbands. I received two of the SEPS dive planers last week so I haven't tried them out yet. Bring on the Soft Water!!!!

[sawtooth]

Thanks guys. Great information and suggestions from you all. Trophy Taker, I will be interested to know how those Seps compare. Until then I guess it is time to go buy a couple of Shuttle Hawks and wait for the soft water to appear.
Sawtooth

[HiTechKoke]

One major difference between the two I forgot to mention is the clips. The ShuttleHawks have a very different style clip that takes getting used to if you are used to the regular offshore clip like the one pictured for the Sep's version. I end up buying separate offshore clips and put them on the ShuttleHawk because I have not been easily re-trained )my wife confirms this behavior) to use the original ones on the shuttlehawks. Maybe someday I will get used to them. I know Gary has showed me a few times. I do like a really long release cable though so I can easily grab them from the water as well as set the line since the cable is out and away from the boat.

Kevin

[TRUBBS]

I know this is super old but found it going down a rabbit hole trying to look for ways to modify my shuttle hawk (would like to have a bit more weight so it has some extra tenstion when loading up the down riggers


Does Seps even make the simply trolling board anymore? This is the first I ever heard of it and can’t seam to find one anywhere online