PDA

View Full Version : tr-1 tune up and hose replacement



dragonfly
05-27-2013, 05:59 PM
In the process of servicing the boat I noticed the oil in the tr-1 reservoir looked like used crankcase oil and thought while changing and flushing the oil, I never liked the slow reaction time with the rubber hoses having to inflate and deflate 'so to speak' the hose humps up and moved around when turning left to right so I pulled the cyl
http://imageshack.us/a/img62/146/003bkh.jpg
http://imageshack.us/a/img196/4294/007kpo.jpg
to clean it up , pressure test, polish up and mount the quick connect fittings
http://imageshack.us/a/img211/926/008axq.jpg
http://imageshack.us/a/img832/5333/013soe.jpg
the hose is a nylon braid, flexible with a 800lb burst strength so there is no stretch and reaction time is almost instant now and stops dead and no over swing. this is the same hose I use on low pressure pilot controls and thought it would be ideal for this application.
here is the control unit
http://imageshack.us/a/img69/9960/011iy.jpg
http://imageshack.us/a/img5/361/015cr.jpg
the push in fittings make it fast and easy
http://imageshack.us/a/img109/8928/014sbn.jpg
dfly

lowe1648mt
05-27-2013, 06:10 PM
Good Job, I would like to see you send those improvements to the boys at Tr 1- pictures and text. Then every one will benefit from your fix.

dragonfly
06-04-2013, 10:31 PM
moved to what we are doing to our boat

fishslayer13
06-07-2013, 07:22 PM
Nice ! I have always hated mine for that. Seemed as though there was air in the line that I couldn't bleed off. Great fix!!